Light Gray, Dark Gray, Beige, Brick Red, Clear Amber
Liquid Epoxy Compound for Patching, Resurfacing, and Rebuilding Concrete.
Uses: Abocrete bonds, levels, fills, rebuilds, and resurfaces concrete and most rigid surfaces. This versatile epoxy is blended with fine sand, creating a structural grout and filler that can be used for countless applications. Repair industrial floors, docks, sidewalks, driveways, stairs, parking decks, and more. Abocrete is perfect for fixing pitted, spalled, worn, or cracked concrete and is ideal for salt damage repairs. It makes a great slip-resistant floor and deck coating by broadcasting sand or ColorGrit™ over the wet Abocrete. It eliminates tripping hazards both at home and in the workplace. Abocrete works great for anchoring posts and railings and installing machinery, precasts, columns, and more. Use with forms to rebuild steps and vertical columns.
Features and Benefits: Abocrete creates repairs that are permanent and cost-effective. It is easy to mix and apply. Blend in fine sand to create a cement-like epoxy compound that self-levels and is shrink-free. Thicken the compound by adding additional sand or aggregate. Abocrete can be applied in any thickness for a finish that is stronger than concrete! It is unaffected by salt water, oils, and chemicals that erode concrete. It holds up well to heavy forklift and truck traffic.
Technical Characteristics: Mixing ratio: 4 parts A to 1 part B. Add sand to reach desired thickness. Coverage: 1 gallon of Abocrete, without sand or aggregate, covers 80 sq. ft., 20 mils thick. One Abocrete kit with sand covers approximately 28 sq. ft., 1/8 in. thick. Apply with simple hand tools or with a brush, paint roller, or squeegee. Pot life: approximately 20-30 minutes. Hardens in 1-5 hours depending on temperature. 100% epoxy solids. Contains no water or solvents. Colors: choose from light gray, dark gray, clear amber, beige, or brick red. Abocrete can be painted after hardening.
ASTM REFERENCE DATA
Clear ABOCRETE meets ASTM C881/C881M, Types I, II, Grade 1, Class C
Light Gray ABOCRETE meets ASTM C881/C881M, Type II, Grade 2, Class C
Dark Gray ABOCRETE meets ASTM C881/C881M, Types I, II, Grade 2 Class C
See product test data below.
This product is GreenGuard® Certified, meaning that it has been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
For Cold/Sub-Freezing Weather or Wet Surfaces: Abocrete (A) can be blended with Abocure 7912-1 in a ratio of 2 parts by volume Abocrete (A) with 1 part by volume Abocure 7912-1 for patching and resurfacing.
Abocrete Kit: 1 gallon liquid epoxy resin (Abocrete A), 1 quart liquid hardener (Abocrete B) and enough sand to make about 4 gallons of Abocrete compound, all packaged together in the same 5 gallon pail. This kit also includes a paint mixing stick, an 8 fluid ounce plastic bottle with spout, disposable gloves, and plastic a putty knife.
Mini Abocrete Kit: 1 quart liquid epoxy resin (Abocrete A), 1/2 pint liquid hardener (Abocrete B) and enough sand to blend about 1 gallon of Abocrete compound, all packaged together in the same 2 gallon pail. This kit also includes a paint mixing stick, an 8 fluid ounce plastic bottle with spout, disposable gloves, and plastic a putty knife.
Abocrete (no sand): 1 gallon liquid epoxy resin (Abocrete A), 1 quart liquid hardener (Abocrete B).
Abocrete 6.25 Gallons (no sand): 5 gallons liquid epoxy resin (Abocrete A), 1 gallon liquid hardener (Abocrete B), 1 quart liquid hardener (Abocrete B).
Abocrete is an epoxy product. You mix the Part A (resin) with the Part B (hardener) and also sand, if you would like.