澳洲8投注

Structural Epoxy Wood Hardener and Consolidant for Deteriorated Wood.  Formulated for Cold-Weather Use.

Uses:  LiquidWood® – Cold is a variant of the original LiquidWood® wood consolidant, formulated for use between 35° F and 60° F*. It is designed to penetrate and harden wood, restore strength, and impart resistance to water, weather, and wear. Use on windowsills, columns, decks, and other wooden architectural elements. Serves as a primer for WoodEpox® – Cold wood replacement compound.

Features and Benefits: LiquidWood – Cold is easy to use and produces permanent results.  Its low viscosity allows it to penetrate deep into the wood and saturate deteriorated wood fibers prior to hardening, even at low temperatures.

Technical Characteristics: 2:1 mixing ratio.  Combine 2 parts, by volume, LiquidWood  – Cold Part A with 1 part LiquidWood – Cold Part B.  Pot Life: approximately 2 hours at 35° F.  Hardens within 24 hours depending on temperature.  Effective coverage varies based on the porosity of the wood.  Translucent amber color liquid resin.  Apply by brushing, pouring or injecting directly onto dry, bare wood.

* LiquidWood – Cold is recommended for use in temperatures ranging from 35°F to 60°F (2°C – 16°C). For applications at higher temperatures, standard LiquidWood is recommended.

DescriptionUnitQtyPrice
3 Pint
$72.50

澳洲8直播

Typical Test Results
Kg/cm2
Mpa
Psi
Compressive Strength 2,600 260 37,700
Elongation 101%
Flexural Strength 7 0.7 100
Hardness, Shore D 67
Pull-off Strength 27 2.6 380
Tensile Strength 28 2.8 400

澳洲8娱乐平台

    When the temp is between 50 and 60, does it work fine to use LiquidWood-Cold with Regular Woodepox?
  1. Q When the temp is between 50 and 60, does it work fine to use LiquidWood-Cold with Regular Woodepox? answer now
    Asked by Lee on December 3, 2021 7:00 am
    Answered by the admin

    Yes, you can use them in conjunction with one another. The LiquidWood-Cold will just cure a bit quicker in the warmer temps.

  2. How difficult is this to apply on vertical surfaces? Will it runoff? If it does, is there a method for vertical application to get a uniform coverage?
  3. Q How difficult is this to apply on vertical surfaces? Will it runoff? If it does, is there a metho...... Read more answer now
    Asked by Will on November 13, 2021 3:42 pm
    Answered by the admin

    You should be able to brush it on to soak into the rotted wood. You can also drill holes at a 45 degree angle and inject the product.

  4. If I have a repair that has been roughed in with regular wood epoxy and liquid wood can I complete it, work over it with wood epoxy and liquid wood cold. Are they compatible will they bond to each other?
  5. Q If I have a repair that has been roughed in with regular wood epoxy and liquid wood can I complet...... Read more answer now
    Asked by Grant Williams on October 31, 2021 9:39 am
    Answered by the admin

    Yes, they are compatible and will bond.

    Answered by the admin

    yes

Send me a notification for each new answer.

澳洲8注册

There are no reviews yet.

Be the first to review “LiquidWood®– Cold”

Your email address will not be published.

澳洲8历史开奖