Conveniently Packaged Kit Containing the Essential Products for Restoring and Repairing Rotted, Deteriorated, or Damaged Wood: LiquidWood®, WoodEpox®, and Abosolv®*.
*24 fl. oz. kit does not include Abosolv.
Uses: LiquidWood is a penetrating epoxy wood consolidant, used to structurally harden, regenerate and waterproof decayed wood. WoodEpox is a shrink-free epoxy putty used to fill, repair and replace missing wood, permanently. Abosolv is a general purpose thinner and solvent for epoxy. It is used to thin LiquidWood when necessary and can also be used for general epoxy clean-up.
Use these products together to restore and repair wood on windowsills and frames, columns, doors, moldings, clapboards, balustrades, boats, furniture and anywhere wood needs to be strengthened or repaired.
Features and Benfits: LiquidWood and WoodEpox are 100% compatible, and when used together, they create structural, shrink-free, permanent repairs that mimic original wood. They bond permanently even to previously damaged substrates and are resistant to further damage by water, insects, UV, and more. Both products can be machined with traditional woodworking tools and are paintable just like wood. These products are proven by decades of exceptional performance and are continually specified for use on prominent and historic structures. They are easy to use and produce professional results. Abosolv is an ideal inclusion in the kit as a thinner for LiquidWood and a general cleaning and smoothing solvent for both LiquidWood and WoodEpox.
Available in four sizes, these kits contain LiquidWood Part A and Part B, WoodEpox Part A and Part B, and Abosolv*. Kits also contains disposable gloves, putty knife, mixing sticks, and instructions. Additional tools and accessories including measuring cups, disposable brushes, putty knives and more are available here.
*24 fl. oz. kit does not include Abosolv.
Technical Characteristics: See individual product pages or download our technical data sheets for individual product specifications.
LiquidWood and WoodEpox are GREENGUARD® Certified meaning that they have been 3rd party verified to contain virtually no VOC’s (volatile organic compounds).
- Can I purchase a single 24oz wood restoration kit directly from you must I go through a dealer?
- Q Can I purchase a single 24oz wood restoration kit directly from you must I go through a dealer? answer nowAsked by May 8, 2022 11:58 amonAnswered by the admin
Yes. You can order on our website or by calling 800-445-1754. I have been using Liquid Wood to penetrate and seal the ends of weathered fence pickets, before painting. Generally the Liquid Wood is fully hardened overnight. One batch got rained on before it had fully hardened and now there is some surface tackiness in some areas. Will this tackiness harden up over time, in warm, dry conditions? If not, is there anything I can do to eliminate the surface tackiness? Would another coat of Liquid Wood applied over the tacky surface be a solution?
- Q I have been using Liquid Wood to penetrate and seal the ends of weathered fence pickets, before p...... Read more answer nowAsked by May 5, 2022 7:50 pmonAnswered by the admin
If the LiquidWood got wet before it cured/hardened, it will not get any harder and/or cure. You'll need to remove it with a solvent like Abosolv, acetone or xylene. Does the wood need to be dry for liquid wood to work effectively?
- Q Does the wood need to be dry for liquid wood to work effectively? answer nowAsked by April 16, 2022 8:09 amonAnswered by the admin
Yes. It must contain less than 17% moisture. I used WoodEpox on a rotted window sill and it is rock hard. Very nice, but what do I use to match the dark walnut solid stain? Nothing penetrates.
- Q I used WoodEpox on a rotted window sill and it is rock hard. Very nice, but what do I use to matc...... Read more answer nowAsked by April 9, 2022 8:21 pmonAnswered by the admin
WoodEpox only accepts a stain on the surface, it does not soak in like a regular piece of wood. A solid stain works better. You also could have tinted the WoodEpox with a powdered pigment while mixing the product together. My Wood Epox is a bit dry and therefore hard to fill in with a spatula. As I am based in Malaysia can I use normal thinner to make it a bit softer?
- Q My Wood Epox is a bit dry and therefore hard to fill in with a spatula. As I am based in Malaysia...... Read more answer nowAsked by April 5, 2022 9:59 pmonAnswered by the admin
You can only thin the WoodEpox with the LiquidWood. There are some warming instructions on the side of the WoodEpox Part A container. You can try warming to get it more soft and pliable. Also, you could use some alcohol on your spatula to help release, smooth and spread the WoodEpox.